Shop - Intake/Exhausts

All Sales Final – No Returns – No Refunds

Dual Intakes
These flanges allow you to create a dual carb intake using your original car or truck intake manifold. Height and spacing are determined by you. You supply the tubes that weld onto the flanges and braze onto the intake manifold. 
Note: You will receive a set of flanges and a block-off plate.  You are buying parts to modify your existing intake manifold, not a complete intake manifold. 
US - $75.00
Canada - $100.00
Tube Intake Flange Kit
This kit allows you to fabricate a dual carb tube intake to any design you choose.  
US - $150.00
Canada - $175.00
2 - Barrel Carb Adapter
This adapter  bolts onto any existing stock single carb manifold allowing you to install a later model 2bbl carb.
US - $150.00
Canada - $175.00
Dual Carb Intake Fabrication
You supply your intake and we modify it to run two stock Carter 1bbl carbs.
US - $350.00
Canada - $375.00
Bolt-On Dual Exhaust Adapter
This is the quickest, easiest, and most affordable method of creating and installing dual exhausts on your original flathead Mopar exhaust manifold. You need a 1 1/2″ or 2″ hole saw to open up the bottom of your existing manifold and then you simply bolt on the second dump using the four bolts that hold the intake and exhaust manifolds together.  A do-it-yourself kit with the two flanges and a gasket is $75 ($100 to Canada). You supply the exhaust tube and do your own welding which allows you to position the dump wherever it suits your vehicle. A completely welded second dump unit is $150 ($175 to Canada). Available for both the small family of engines, 218/230 and their larger cousins, 251/265. Prices include shipping to lower 48 US addresses.  Adding a second dump to your existing exhaust manifold doubles the outgoing flow rate while allowing the use of either single or dual exhausts without a balance tube.
NOTE:  You will receive a set of flanges and gasket or a welded dump and gasket. You are buying parts to modify your existing exhaust manifold, not a complete exhaust manifold. 
PLEASE READ THIS: Instructions and parts lists are emailed at the time you order, you will not receive paper copies in the shipment, check your email spam or junk folder if you do not see them in your inbox.
Dual Exhaust Kit (US) - $75.00
Dual Exhaust Kit (Canada) - $100.00
Dual Exhaust Welded Unit (US) - $150.00
Dual Exhaust Welded Unit (Canada) - $175.00

RustyHope

Ships From Davenport, Florida

2_Barrel_Carb_Adapter_1_edited